Difference Between Nitrile and Viton

Thekey differencebetween nitrile and Viton is thatnitrile rubber compounds have a comparatively low density while Viton has a comparatively large density.

The density measurement is a better way to distinguish nitrile rubber from Viton rubber material because the density of nitrile rubber is usually around 1000 kg/m3 while the density of Viton is about 1800 kg/m3. However, at first sight, we can identify Viton by its characteristic green-brown colour and nitrile rubber by its yellow colour.

CONTENTS

1.Overview and Key Difference
2.What is Nitrile
3.What is Viton
4.并排比较 - 表格形式的氮与viton
5.概括

什么是氮？

Nitrile compounds are organic compounds having the general chemical formula R-CN. In other words, these compounds have a cyano group. Usually, the term cyano- is usually used interchangeably with the term nitrile in industrial applications. We can observe many important applications of nitrile compounds, including the formation of methyl cyanoacrylate, production of superglue, nitrile rubber, nitrile-containing polymers that are useful in the production of medical gloves, etc. There are many other applications of nitrile rubber as well; especially as automotive and other seals due to its resistance towards fuel and oil. More importantly, inorganic compounds containing the cyano group are not called nitrile compounds; they are calledcyanidesinstead.

When considering the structure, nitriles are linear molecules. These molecules reflect the sp hybridization of the carbon atom having the triple bond with the nitrogen atom. Nitrile compounds are polar and have a dipole moment. Nitrile compounds occur as liquids which have high relative permittivities.

We can produce a nitrile compound industrially via ammoxidation and hydrocyanation. Both these routes are sustainable (green) and have a minimum release of hazardous substances.

What is Viton?

Viton is a brand name ofsynthetic rubberand fluoropolymer elastomers. The name Viton is given for FKM compounds (fluorocarbon compounds). These polymer materials are useful in seals, chemical resistant gloves, and other moulded or extruded goods. The brand name “Viton” is a registered trademark of Chemours Company since 1957.

We can categorize Viton fluoroelastomers under the designation of FKM, and this category of elastomers include copolymers of hexafluoropropylene (HFP), vinylidene fluoride (VDF) and perfluoromethylvinylether (PMVE). We can observe that the fluorine content of these Viton polymers ranges from 66-70%. We can often distinguish this material from most other polymer materials due to its green-brown colour. However, a more reliable test is to identify the density of the material, which is often over 1800 Kg/m3. This density is significantly higher than most other rubber materials.

What is the Difference Between Nitrile and Viton?

Nitrile rubber and Viton are twoelastomerpolymer types that are different in their appearance and density. Nitrile compounds are organic compounds having the general chemical formula R-CN while Viton is a brand name of synthetic rubber and fluoropolymer elastomers. Measuring the density is a better way of distinguishing the two polymer materials. The key difference between nitrile and Viton is that nitrile rubber compounds have a comparatively low density while Viton has a comparatively a large density.

Below infographic lists more differences between nitrile and Viton.

概括– Nitrile vs Viton

硝酸和Viton之间的关键区别在于，硝酸橡胶化合物的密度相对较低，而Viton的密度相对较大。但是，通过查看材料，我们可以通过其外观的绿色颜色来识别Viton，氮橡胶具有黄色。

Reference:

1. Timco Rubber. (n.d.). Retrieved October 22, 2020,Available here.
2. 4关于Viton或FKM橡胶的常见误解。（2018年7月27日）。检索到2020年10月22日Available here.

Image Courtesy:

1. “NBR balles” By Cjp24 – Own work(CC BY-SA 3.0)viaCommons Wikimedia

2.通过来源（合理使用）通过Commons Wikimedia