关键区别 - 本地行动与极化
The terms local action and polarization are used to name two types of defects inbatteries。这些发现在简单的电池。These defects reduce the practical value and performance of these cells (or batteries). Local action of a battery is the internal loss of battery due to local currents that flow between different parts of a plate. These local currents are produced by chemical reactions. Polarization is the termination of the cell reaction in the battery due to the collection of氢气在积极周围electrode。The关键区别between local action and polarization is that可以使用纯锌将局部作用最小化,而极化可以使用去极化剂(例如锰氧化物)最小化
CONTENTS
1。概述和关键差异
2。什么是本地行动
3。什么是极化
4。并排比较 - 局部动作与表格形式的极化
5。Summary
什么是本地行动?
电池的局部作用是由于电流从与同一电极流到同一电极的电流导致电池的恶化。电池包含一个或多个electrochemical cells。这些电化学细胞与电力设备具有外部连接。电池中有两个终端;正终端或cathode and negative terminal or the anode。电池将化学能量转换为电能。
有电极和电解质inside a battery. The electrolyte contains阴离子和阳离子that are required to keep the continuous current flow inside the battery. Theredox reactions当电解质提供电子创建电流时发生。但是,有时可能会在电池内部发生某些缺陷,例如降低电池的性能和价值。本地行动就是这样的缺陷。
局部动作是电池的电流排放,即使由于存在的杂质,电池未连接到外部电源设备。这些杂质可以在电极的某些部分之间产生潜在的差异。这是一种自我解雇。
For example, when a zinc electrode is used, there can be impurities embedded such as iron and lead. These impurities can act as a positive electrode when compared to zinc electrode and zinc act as a negative electrode. Then, when the cell is not in use, electric currents flow through these electrodes, eventually resulting in the deterioration of the cell.
可以使用没有嵌入其中的杂质的纯锌电极最小化局部作用。但这是一个非常昂贵的选择。因此,在将锌与汞合金的情况下用于生产锌汞合金的情况下,使用了更便宜的选项。该过程称为合并。
什么是极化?
极化是一种缺陷,由于正极围绕正极的氢气积累而发生在简单的电池中。在简单的细胞中,由于细胞内部发生化学反应而进化了氢气。当将这种氢气在正极周围收集时,最终会导致电解溶液中阳性电极的绝缘。这个过程称为极化。
The polarization of a battery reduces the practical value and performance of a cell. Therefore, it is considered as a cell defect. To minimize the polarization, a depolarizer can be used since it can react with hydrogen gas produced in the cell. A common depolarizer is manganese oxide. It reacts with hydrogen gas producing water as a byproduct.
局部作用和极化有什么区别?
本地行动与极化 |
|
电池的局部作用是由于电流从与同一电极流到同一电极的电流导致电池的恶化。 | 极化是一种缺陷,由于正极围绕正极的氢气积累而发生在简单的电池中。 |
过程 | |
在局部作用中,锌电极中的嵌入式杂质可以充当正电极,并在锌和该正电极之间产生电流。 | 电池内化学反应中产生的氢气会在电极周围积聚,并导致绝缘。 |
原因 | |
由铁和铅等电极中的杂质引起。 | 原因d by hydrogen gas produced by chemical reactions. |
最小化 | |
Can be minimized using pure zinc. | 可以使用去极化剂(例如锰氧化物)最小化。 |
概括 -本地行动与极化
局部作用和极化是电池下讨论的两种缺陷。局部作用和极化之间的关键区别在于,可以使用纯锌将局部作用最小化,而使用诸如锰氧化物的去极化剂可以最大程度地降低极化
参考:
1.“简单电池的缺陷。”简单电池〜的缺陷,在这里可用
2.“电池(电力)。”Wikipedia,Wikimedia基金会,2018年2月22日。在这里可用
图片提供:
1.’panasonic-pp3-9伏式 - 折断’(CC BY-SA 2.5)通过下议院维基梅迪亚
Leave a Reply